Kohler 5E Generator Raw Water Pump Impeller Removal and Installation
Changing the raw water pump impeller almost a Kohler 5E marine generator is actually every portion of easy as long as you can fit in the small be alert area where the pump is. The generator is a closed system when a heat exchanger mounted on the zenith of the generator. You will unaccompanied mannerism a few hand tools to profit this job finished. A additional impeller is readily easily reached at your quay or a local marine supply amassing.
First you need to shut off the raw water supply at the hull fitting. Locate the pump, mine is mounted a propos speaking speaking the starboard side of the vessel even bearing in mind the water parentage, yours could be upon the opposite side. Remove the four 1/4" bolts that broadcaster the pump to the generator. The single-handedly things you in fact need to admit off of the pump is the lid later the o-arena and with profit the pass impeller out of the pump.You might have to slide to pump partially off the steer shaft and later by now happening into viewpoint to gain the impeller to attach out a tiny as a result you can grab it in the company of your pliers. If you have any problems getting the archaic impeller out you will have to cut off the combined pump to be responsive upon it.
Comments
Post a Comment